Horizontal Machining Center

Horizontal Machining Center

MH-800A

Travel
Travel, X/Y/Z mm 1000/850/950
Spindle Center To Pallet Face mm 60-910
Spindle Nose To Pallet Center mm 150-1100 (215-1100)*
Pallet
Pallet Size mm 800 x 800
Maximum Workpiece mm Ø1000
Maximum Pallet Load kg 1000
Maximum Workpiece Height mm 1000
Pallet Surface Configuration mm 24-M16 Pitch 160
Pallet Indexing  
Spindle
Spindle Max. Speed rpm 10000
Low/Hight Gear Variation rpm 1500
Spindle Max. Torque N-m 165
Spindle Taper   7/24 Taper,NO.40
Spindle Bearing Id mm 70
Spindle Transmission   Direct (Belt Type+ZF)
Feed Rate
Max. X/Y/Z Rapid Speed mm/min 32000
Cutting Feed Rate mm/min 1-10000
Job Feed Rate mm/min 1260
Automatic Tool Change (ATC)
Type Of Tool Shank   ISO 40 or NBT- 40
Tool Capacity one of a pair 60
Max. Tool Diameter (Without Adjacent Tool) mm 80(160)
Max. Tool Length mm 450
Max. Tool Weight kg 8
ATC Changing Time(T to T) sec. 5
Tool Selection Method   fixed Address
Automatic Pallet Changer (APC)
Number of Pallets one of a pair 2
Pallet Changing Type   Rotary Type
Time For APC sec. 18
Controller System
FANUC   0i-MD
Motor
Spindle Motor, Power kw 22/26
Spindle Motor N.m 165
X/Y/Z/B Axis Motor kw 7/7/7/3
Motor, Hydraulic System kw 2.2
Motor, Coolant Pump System kw 1.6
Power Supply
Power Requirement KVA 42
Capacity Of Oil/Coolant Tank
Capacity, Hydraulic System L 60
Capacity, Lubrication System L 4
Capacity, Coolant System L 800
Mechanical Specifications
Height mm 3362
Floor Area mm 5966 x 3470
Weight kg 23000