Horizontal Machining Center

Horizontal Machining Center

LH-800B

Travel
Travel, X/Y/Z mm 1300/1200/1200
Spindle Center To Pallet Face mm 100-1300
Spindle Nose To Pallet Center mm 200-1400
Pallet
Pallet Size mm 800x800
Maximum Workpiece mm Ø 1300
Maximum Pallet Load kg 2000
Maximum Workpiece Height mm 1300
Pallet Surface Configuration mm 24-M16 Pitch 160
Pallet Indexing  
Spindle
Spindle Max. Speed RPM 6000
Low/Hight Gear Variation RPM 1500
Spindle Max. Torque ( Standard ) N-m 660
Spindle Taper   7/24 Taper , NO.50
Spindle Bearing Id mm 100
Spindle Transmission   ZF Gear Box + Belt Transmission
Feed Rate
Max. X/Y/Z Rapid Speed mm/min 32000
Cutting Feed Rate mm/min 1-10000
Job Feed Rate mm/min 1260
Automatic Tool Change (ATC)
Type Of Tool Shank   ISO 50  or  BBT-50
Tool Capacity one of a pair 60
Max. Tool Diameter (Without Adjacent Tool) mm 125(250)
Max. Tool Length mm 600
Max. Tool Weight kg 30
ATC Changing Time ( T to T ) sec. 8
Tool Selection Method   fixed Address
Automatic Pallet Changer (APC)
Number of Pallets one of a pair 2
Pallet Changing Type   Rotary Type
Time For Apc sec. 18
Controller System
FANUC   0i-MF
Motor
Spindle Motor, Power KW 22/26
Spindle Moto N.m 165
X/Y/Z/B Axis Motor KW 7 / 6 / 7 / 3
Motor, Hydraulic System KW 3.7
Motor, Coolant Pump System KW 1.6
Power Supply
Power Requirement  KVA 42
Capacity Of Oil/Coolant Tank
Capacity, Hydraulic System L 60
Capacity, Lubrication System L 4
Capacity, Coolant System L 850
Mechanical Specifications
Height mm 3948
Floor Area mm 6991x4326
Weight kg 25000