Horizontal Machining Center

Horizontal Machining Center

LH-630B

Travel
Travel, X/Y/Z mm 1000/850/950
Spindle Center To Pallet Face mm 100-950
Spindle Nose To Pallet Center mm 150-1100
Pallet
Pallet Size mm 630x630
Maximum Workpiece mm Ø 1000
Maximum Pallet Load kg 1000
Maximum Workpiece Height mm 1000
Pallet Surface Configuration mm 24-M16 Pitch 125
Pallet Indexing  
Spindle
Spindle Max. Speed RPM 6000
Low/Hight Gear Variation RPM -
Spindle Max. Torque( Standard ) N-m 165
Spindle Taper   7/24 Taper , NO.50
Spindle Bearing Id mm 100
Spindle Transmission   Belt Type
Feed Rate
Max. X/Y/Z Rapid Speed mm/min 32000
Cutting Feed Rate mm/min 1-10000
Job Feed Rate mm/min 1260
Automatic Tool Change (ATC)
Type Of Tool Shank   ISO 50 or BBT-50
Tool Capacity one of a pair 40
Max. Tool Diameter (Without Adjacent Tool) mm 120(230)
Max. Tool Length mm 450
Max. Tool Weight kg 20
ATC Changing Time ( T to T ) sec. 5
Tool Selection Method   fixed Address
Automatic Pallet Changer (APC)
Number of Pallets one of a pair 2
Pallet Changing Type   Rotary Type
Time For APC sec. 18
Controller System
FANUC   0i-MF
Motor
Spindle Motor, Power KW 22/26
Spindle Motor N.m 165
X/Y/Z/B Axis Motor KW 7 / 7 / 7 / 3
Motor, Hydraulic System KW 2.2
Motor, Coolant Pump System KW 1.6
Power Supply
Power Requirement  KVA 42
Capacity Of Oil/Coolant Tank
Capacity, Hydraulic System L 60
Capacity, Lubrication System L 4
Capacity, Coolant System L 800
Mechanical Specifications
Height mm 3362
Floor Area mm 5966x3570
Weight kg 23000