Horizontal Machining Center

Horizontal Machining Center

LH-500B

Travel
Travel, X/Y/Z mm 700 / 650 / 650
Spindle Center To Pallet Face mm 50-700
Spindle Nose To Pallet Center mm 150 - 800
Pallet
Pallet Size mm 500 x 500
Maximum Workpiece mm Ø 700
Maximum Pallet Load kg 500
Maximum Workpiece Height mm 800
Pallet Surface Configuration mm 24-M16 Pitch 100
Pallet Indexing  
Spindle
Spindle Max. Speed   RPM 6000
Low/Hight Gear Variation  RPM -
Spindle Max. Torque ( Standard ) N-m 120
Spindle Taper   7/24 Taper , N0.50
Spindle Bearing Id mm 100
Spindle Transmission   Direct
Feed Rate
Max. X/Y/Z Rapid Speed mm/min 36000
Cutting Feed Rate mm/min 1-10000
Job Feed Rate mm/min 1260
Automatic Tool Change (ATC)
Type Of Tool Shank   ISO 50 or BBT-50
Tool Capacity  one of a pair 40
Max. Tool Diameter (Without Adjacent Tool) mm 120 ( 230 )
Max. Tool Length mm 380
Max. Tool Weight kg 20
ATC Changing Time ( T to T ) sec. 5
Tool Selection Method   Fixed Address
Automatic Pallet Changer (APC)
Number of Pallets one of a pair 2
Pallet Changing Type   Rotary Type
Time For APC sec. 18
Controller System
FANUC   0i-MF
Motor
Spindle Motor, Power KW 15 / 18.5
Spindle Motor N.m 120
X/Y/Z/B Axis Motor KW 7 / 7/ 4 / 1.6
Motor, Hydraulic System   KW 2.2
Motor, Coolant Pump System   KW 1.6
Power Supply
Power Requirement  KVA 42
Capacity Of Oil/Coolant Tank
Capacity, Hydraulic System   L 60
Capacity, Lubrication System L 4
Capacity, Coolant System L 760
Mechanical Specifications
Height mm 2980
Floor Area mm 5000 x 3200
Weight kg 15000