Horizontal Machining Center

Horizontal Machining Center

LH-300

Travel
Travel, X/Y/Z mm 460 / 460 / 350
Spindle Center To Pallet Face mm 60 - 520
Spindle Nose To Pallet Center mm 60 - 410
Pallet
Pallet Size mm 320 x 320
Maximum Workpiece mm Ø 430
Maximum Pallet Load kg 250
Maximum Workpiece Height mm 550
Pallet Surface Configuration mm 8 - M12 Pitch 100
Pallet Indexing   0.001 ˚
Spindle
Spindle Max. Speed RPM 15000
Spindle Max. Torque ( Standard ) N-m 70
Spindle Taper   7 / 24 Taper , No.30
Spindle Bearing Id mm 45
Spindle Transmission   Direct Drive
Feed Rate
Max. X/Y/Z Rapid Speed mm / min 48000
Cutting Feed Rate mm / min 1 - 12000
Job Feed Rate mm / min 1260
Automatic Tool Change (ATC)
Type Of Tool Shank   BBT - 30
Tool Capacity one of a pair 30
Max. Tool Diameter (Without Adjacent Tool) mm 60 ( 100 )
Max. Tool Length mm 210
Max. Tool Weight kg 5
Tool Selection Method   Random
utomatic Pallet Changer (APC)
Number of Pallets one of a pair 2
Pallet Changing Type   Rotary
Time For APC sec. 10
Controller
FANUC   0i-MD
Motor
Spindle Motor, Power KW 7.5 / 11
Spindle Motor N.m 17.9 / 47.7
X/Y/Z/B Axis Motor KW 2.7 / 4.5 / 2.7 / 1.6
Motor, Hydraulic System KW 1.5
Motor, Coolant Pump System ( Punching ) KW 1.5
Power Supply
Power Requirement KVA 25
Capacity Of Oil/Coolant Tank
Capacity, Hydraulic System L 50
Capacity, Lubrication System L 2
Capacity, Coolant System L 300
Mechanical Specifications
Height mm 2270
Floor Area (+ Chip Conveyor) mm 3530 x 2210 ( 3056 )
Weight kg 7000