Horizontal Machining Center

Horizontal Machining Center

LH-1250

Travel
Travel, X/Y/Z mm 2100/1235/1500
Spindle Center To Pallet Face mm 80-1335
Spindle Nose To Pallet Center mm 318-1815(*450-1815)
Pallet
Pallet Size mm 1250 x 1250
Maximum Workpiece mm ¢2000
Maximum Pallet Load kg 5000
Maximum Workpiece Height mm 1500
Pallet Surface Configuration mm 80-M20 tapped holes Pitch 125
Pallet Indexing  
Spindle
Spindle Max. Speed RPM 6000
Low/Hight Gear Variation RPM 1500
Spindle Max. Torque N-m 660
Spindle Taper   7/24 Taper,NO.50
Spindle Bearing Id mm 100
Spindle Transmission   ZF Gear Box + Belt Transmission
Feed Rate
Max. X/Y/Z Rapid Speed mm/min 24000
Cutting Feed Rate mm/min 1-10000
Job Feed Rate mm/min 1260
Automatic Tool Change (ATC)
Type Of Tool Shank   ISO 50 or NBT-50
Tool Capacity one of a pair 60
Max. Tool Diameter (Without Adjacent Tool) mm 125(250)
Max. Tool Length mm 600
Max. Tool Weight kg 30
ATC Changing Time (T to T) sec. 8
Tool Selection Method   Fixed Address
Automatic Pallet Changer (APC)
Number of Pallets one of a pair 2
Pallet Changing Type   Inclined Shuttle-Type
Time For APC sec. 26
Controller System
FANUC   0i
Motor
Spindle Motor, Power KW 22/26
X/Y/Z/B Axis Motor KW 7/6/7/4
Motor, Hydraulic System KW 3.7
Motor, Coolant Pump System KW 1.6
Power Supply
Power Requirement  KVA 65
Capacity Of Oil/Coolant Tank
Capacity, Hydraulic System L 60
Capacity, Lubrication System L 4
Capacity, Coolant System L 840
Mechanical Specifications
Height mm 4013
Floor Area mm 8410 x 5850
Weight kg 35000